康拓威技术（深圳）有限公司|Theia镜头代理商|安讯士AXIS摄像机|安讯士监控系统|博世BOSCH监控|博世会议系统|索尼SONY监控|松下PANASONIC监控|三星韩华SAMSUNG监控|霍尼韦尔Honeywell|海康|大华|华为监控|Theia无畸变镜头|AXIS监控|安讯视摄像机

Apply to PLE series of modernization and the calling station u can choose to gain u voice filter and limiting device u u output level control loop control, can contain up to 8 calling station Spot lili and calling station is an outstanding modern station call, fashion and elegant, equipped with a stable solid metal base, flexible rotation rods and single capacitor microphone directivity. It is used to call selected areas in a public broadcast system centered on the PLE series two-zone mixer and hybrid amplifier. In addition to being used on the desktop, the belle design also allows the device to be smoothly embedded in the table. Basic function gain, voice filter and clarity this call station is equipped with optional gain, voice filter and amplitude limiter, which improves speech clarity. Range call stations can provide balanced line level output so that it can be extended through the cat-5 cable up to 200 metres from the mixer. The loop is connected by the loop rj-45 connector to connect multiple call stations together as a Daisy chain. Priority priority is automatically determined, for example, the nearest call station has the highest priority, which can cover other call stations a little further from the mixer. When a higher-priority call station issues a call, the yellow light on the lower-priority call station lights up. The DIP switch and state USES the DIP switch at the bottom of the call station to select different microphone gain levels, prompts, and voice filters. The service access knob controls the flat attenuation of the microphone. The LED indicator on the call station is used to display the selected area. Another LED indicator is used to display the activated state of the microphone and system: Standby, green flash music (prompt), green lights up said receiver is active, amber lights up said the higher priority call control and two state LED lamp, lamp, PTT button, two regional select key, selecting LED lamp, DIP switches, the volume knob Certificate of interconnected components, two RJ45 socket with immunity recognition security in accordance with EN 60065 standard radiation in accordance with EN 55103-2 standard EN 55103-1 standard area certification European CE accessories number component 1 pple 2CS call station 1 cable, end equipped with lockable cat-5 connector technical specifications electrical voltage range 24 VDC, Provided by PLE hybrid amplifier or hybrid device rated current consumption < 30 mA performance sensitivity of 85 dB SPL (0 dB gain preset) rated output level 700 mV input volume (maximum) of 110 dB SPL gain the default - 15/0 / + 6 dB limit convergence threshold 2 V compression limiting device and distortion < 0.6% (maximum) input signal-to-noise level (equivalent) 25 dB SPLA 100 Hz frequency response to 16 kHz voice filter - 3 DB, 315 Hz, qualcomm, 6 dB/oct output impedance of 200 ohms music selection prompt 6 mechanical base size (high) x width x thick (not including receiver) 40 x 100 x 235 mm (1.57 x 3.97 x 9.25 inches) rods length (contain words tube) 390 mm (15.35 inch) cable length of 5 meters (16.4 feet) weight about 1 kg (2.2 pounds) to install independent color carbon black and silver work temperature - 10 DHS C to the environmental specifications + 45 DHS (+ 14 DHS F C to + 113 DHS F) storage temperature and 40 DHS C to + 70 DHS C (40 DHS F - to + 158 DHS F) relative humidity < 95% order information PLE ? 2 cs spot lili and call and call stop using metal base design, equipped with a flexible rotation microphone handle and single directivity condenser microphone, there are two area to choose from. Order, PLE - 2 cs